Trend KWJ750P 750mm Pro Multi-Material Worktop Jig

Features

FRONT EDGE SETTING All settings are done from the front edge eliminating any discrepancies from scribing or when using non-standard width worktops.

EASY SET REFERENCE WINDOW Fast set up for any backset, simply align to a measured line.

5 BACKSET OPTIONS (3, 5, 10, 24, 35mm) to meet the demands of new materials, edge profiles and trends.

FLUSH EDGE COMPATABILITY Allows worktops to be cut flush with door faces for handleless contemporary styles without additional measuring or marking up.

SINGLE PASS JOINT CUTTING ON NARROWER BACKSETS WITH THINNER WORKTOPS Minimises strain on the router and extends cutter life.

FAST JOINTING Cuts a full male and female joint in 15 minutes including setting up.

MULTIPLE WORKTOP MATERIAL COMPATABILITY Compact laminate, Composite, Solid Wood, Chipboard Laminate.

NO SET WORKTOP WIDTH RESTRICTION No need for alignment pins for worktop widths.

FRUSTRATION FREE SETUP Simple intuitive setup; measure, mark, clamp and cut.

OFFSET CAMS Unique backset wedges for consistent easy setting.

EDGE PROFILE COMPATABILITY Covers square edge, small radius, Postform radius and bullnose profiles.

CLAMP RECESSES For below the surface clamping for unrestricted routing with plunge saw clamps.

Specification

Length - 985 mm

Width - 335 mm

Thickness - 12 mm

Weight - 4.73 kg

End Cut - 45 degrees

Corner Radius - 40 mm

Corner Radius - 100mm

Corner Radius - 400 mm

Corner Mitre Joint - 45 degrees

Female cut material width loss (inset) - Variable

Standard Equipment

1x Trend KWJ750P 750mm Pro Multi-Material Worktop Jig

4x ABS Plastic pins

4x Cams (pairs)